411-RA25A

Alternating command for hydropressure units or effluent centrals with 2 electric pumps + alarm.

Plastic box with 11-pin circular plug.
Switch for application selection:
- PBA – hydropressor unit with command alarm command for lack of water made by float switch;
- PAS – hydropressor unit with command alarm for lack of water made by probes;
Indication of the selected type of application:
- P – hydropressor units, through white LED;
- W – effluent plant, through white LED.
Indication of high level alarm command closed (6-11).
Indication of the status of the simultaneity command (6-7).
indication of alternanting command status (6-8).
Indication of water in the tank (6-9), in applications for hydropressor units.
Indication of the status of the stop command (6-9), in applications for effluent plants.
Indication of output relays ON(1-3), (1-4).
Indication of alarm relay ON (1-5).
Indication of device with voltage supply (2-10).
Front indication of the nominal relay power supply voltage.
Side display of the wiring diagram and the operating diagram.

Detection circuits sensitivity range: 0 a 40 Kohm
Detection circuits voltage: 12 VAC
Supply voltages: AC: 24V; 230V (other voltages on request)
Supply tolerance: -15%…+10%
Power consumption: < 3VA
Dimensões: (W) 35mm x (H) 79mm x (P) 77mm
Output relay:
- Max. power rating: 2500VA (10A/250V)
- Max. switching voltage: 400VAC

411RA25A002

24VAC

411RA25A023

230VAC