- Modular Box (3 modules) for application on DIN rail.
- 2 command keys (RST) and (TEST).
- Indication of alarm relay ON (14-15), by acoustic alarm.
- Indication of alarm relay ON (17-18), by a red LED.
- Power supply ON (10-11), indicated by a yellow LED.
- Supply voltage indicated on the front of the relay.
- Wiring scheme indicated on the side of the relay.
- Switching diagram indicated on the side of the relay.
Supply voltage
AC/DC: 24V
AC: 230V
(Other voltages on request)
Supply tolerance
-15%...+10%
Power consumption
< 3VA
Dimensions
(W) 54mm x (H) 90mm x (P) 68mm
Every time the alarm command (1-2) closes, the output relays (14-15 and 17-18) operate, and simultaneously turn ON the alarm signal (red LED) and the acoustic alarm. By pressing on the reset key (RST) both alarm output and (14-15) and the acoustic alarm are turned OFF, being necessary to momentarily close the alarm module supply or open and close the alarm command (1-2) so the output and acoustic alarm may be ON again.
After the resolution of the cause of the alarm (alarm command opening (1-2)), all the relays and signaling turn OFF.
By pressing the “TEST” key, all outputs (14-15 and 17-18) and acoustic and light signaling are tested.